Set Up 2: Wireless Headphone and Transmitter Base Are Connected - Duet – Avantree Support

Note 2.1 The Headphones and the transmitter base in the SET are "Factory Locked." You don't need to manually pair them each time. All you need to do is turn both on and they should automatically connect within 2-5 sec.

Step 1. Power the Transmitter ON.

Flip the Power Switch on the Transmitter to ON.

Step 2. Power the Headphones ON.

Switch the On/Off Button on the Headphone to On mode. The Indicator lights up, flashing BLUE. And wait for a few seconds, they should automatically connect with each other.

Note 2.2 Once connected, headphone shows SOLID BLUE. The LED on the transmitter are solid white. You'll also hear "CONNECTED" through the Headphones.

If this is not the case, please turn both devices off and turn them back on again and wait for 5-10 seconds.

The next step is Adjust the TV Audio Settings