English Deutsch Français Español Italiano
Avantree Audition User Manual
NFC Bluetooth Stereo Headphones
1. Headset overview
NOTE: All accessories are also available on avantree.com
2. Connect
2.1 Connect with mobile phone
STEP 1 Turn Audition off (press and hold MFB button for 4s).
STEP 2 Press and hold MFB button for 7-10s until LED indicator flashes blue and red alternately.
STEP 3 Activate Bluetooth on your phone and select “Avantree Audition”.
2.2 Connect with NFC enabled mobile phone
STEP 1 Make sure NFC function is turned on from your phone and that the screen is active and unlocked.
STEP 2 Hold the NFC mobile phone against the NFC zone of the headset (the NFC logo).
NOTE: Since NFC antenna is located in different position of phone, it is helpful to know the position for fast pairing. For details on NFC, see your phone’s user manual.
2.3 Connect with non Bluetooth enabled devices
When the device is not Bluetooth enabled, or battery of headset is low, you can use the 3.5mm audio cable to stream music, just connect the cable to the device.
NOTE: The buttons and microphone on the headphones will not work under this situation.
2.4 Connect with two mobile phones simultaneously
STEP 1 Connect headset with the first phone as above. Then Turn off Bluetooth of the first phone.
STEP 2 Connect headset with the second phone as above. Then turn off the headset.
STEP 3 Turn on Bluetooth of the first phone. Then Turn on the headset.
STEP 4 It will automatically connect with the second phone, after that please tap from the first phone to manually connect it.
2.5 Connect with PC/notebook
STEP 1 Turn Audition off (press and hold MFB button for 4s).
STEP 2 Press and hold MFB button for 7-10s until LED indicator flashes blue and red alternately.
STEP 3 Activate Bluetooth on your PC/notebook and select “Avantree Audition”.
NOTE: Make sure PC/notebook is Bluetooth enabled and supports A2DP profile, otherwise you may need a Bluetooth audio adapter to add the feature on PC/notebook that do not. For details on how to set up with PC/notebook, please see support.avantree.com.
3. How to use
![]() |
On/Off | Press and hold MFB 4s |
![]() |
Answer a call | Press MFB once |
![]() |
End a call | Press MFB once |
![]() |
Reject a call | Double click MFB |
![]() |
Redial last number | Double click MFB |
“ V+ ”“ V− ” | Voice Dial / Command | Short press “V+” and “V-” |
![]() |
Play music | Press MFB once |
![]() |
Pause music | Press MFB once |
V + | Volume up | Press “V+” once |
V − | Volume down | Press “V-” once |
V + | Next track | Press and hold “V+” |
V + | Previous track | Press and hold “V-” |
4. How to charge
When the LED blinks red, you should recharge your headphones. Please remove the micro-USB protector and charge the headphones via the supplied USB to AC adapter or PC USB port. It normally takes about 3 hours to fully charge the battery. The LED will stay red when charging and will turn off when charging is complete.
NOTE: AC adapter requirement 5V / 500mA-2A.
5. Product specifications
Bluetooth version: 4.0
Support profiles: Headset, Handsfree, A2DP, AVRCP
Operational range: Class 2, 10 meters
Battery: rechargeable lithium battery
Talk time: up to 50 hrs
Music time: up to 40 hrs
Standby time: up to 20 days
Headset weight: 180g
Headset size: 170mm(W)x180mm(H)X80mm(D)
Z-PKMN-AS9-000V1
Comments