DG40s - Guide - Use with Apple AirPods

Keywords: DG40s, USB Dongle, AirPods, Apple, pair, connect, not working, pairing 

If you use Win7 + BlueSoliel, see the Part 1. If you use Win 10, see Part 2.

  • Part 1 - For Win 7/8 - Use BlueSoleil:
  1. Fine Bluetooth icon, right click it and select ‘Turn on Bluetooth’ , then open ‘Display classic View’ .
  2. Double click orange GLOBE to search device.
  3. Set the AirPods into pairing mode, with AirPods in case and lid open then press button until light blinks.

    Then your AirPods should appear as a new icon. (If you cannot find AirPods, most likely is because your AirPods is connected with your other devices. Please make SURE all your phone watch etc. Bluetooth function is turned OFF!)

  4. Double click the Airpods icon, a number for the available services appear in the corner.
  5. Right click the AirPods icon again and select ''Pair''.
  6. Click ''Yes'' on the PC, then your AirPods connected with the PC. Now you can use AirPods.

    Notice:  If you need to use microphone, right click the Microphone’s icon and select ‘Mute off’.

 

  • Part 2 - For Win 10, Plug and Play

1.   Find Bluetooth icon and click other devices, your PC will auto search the new devices.

     

2. Set the AirPods into pairing mode, with AirPods in case and lid open then press button until light            blinks.

3. Your AirPods should appear as a new icon, then click ‘Ready to pair’. (If you cannot find AirPods, most likely is because your AirPods is connected with your other devices. Please make SURE all your phone watch etc. Bluetooth function is turned OFF!)

    

4. Now your AirPods were connected.

    

Have more questions? Submit a request

Comments