Audition Pro / AS9P - Guide - Use with Bluetooth TV


NOTE: You may need to get a Bluetooth transmitter to work with your TV to get no audio delay experience since most TV native Bluetooth does not support low latency and you will still experience 200ms delay >> Choose Avantree Bluetooth Transmitter


1. Set Audition Pro enter into PAIRING MODE -  

From OFF status, hold POWER button for 5 seconds till the LED indicator blinks RED and BLUE alternately.


2. Set your TV into PAIRING MODE-

(eg. Samsung SMART Bluetooth-enabled TV reference -

  • Press the Home button on your remote.
  • Navigate to Settings > Sound > Sound Output.
  • Select Speaker List.
  • Select "Avantree Audition Pro" to connect. Note: If the TV cannot detect your headphones, move the device closer to the TV.
  • Select Pair and connect.
  • To complete the connection, select OK.

(eg. LG SMART Bluetooth-enabled TV reference -

  • Select the Settings icon.
  • Select Advanced Settings.
  • From the Sound menu select Sound Out.
  • Select LG Sound Sync Bluetooth from the list, then select Detect.
  • Choose "Avantree Audition Pro" from the list to pair.

NOTE: 1) It may take a 1-2 seconds for audio to play in your headset when you first turn on your TV. 2) Headphones' re-connection function depends on the different make/model of the TV. 


Have more questions? Submit a request


  • Avatar
    Ronald Boeving

    I tried this procedure but the dialog requested a passcode. I tried 0000 and 1234 without success. What passcode should I try?