HT3187 - How to lock the transmitter to the receiver?

The transmitter and receiver included in HT3187 set is LOCKED to each other, in this way, there is NO NEED to pair them for each use, just power on them and they will auto reconnect to each other. 

If you found your transmitter and receiver cannot auto-reconnect to each other after turn on, maybe they are NOT locked to each other, you can lock them by following steps:

Step 1, Turn on the transmitter(Priva III), for first use, it should enter pairing mode automatically; or you             can set transmitter into pairing mode manually by pressing and holding MFB for 5s until LED                     flashes BLUE and RED alternately.

Step 2, Turn on the receiver(Clipper Pro), for first use, it should enter pairing mode automatically;or you               can set the receiver into pairing mode manually by pressing and holding MFB for 5s until LED                   flashes BLUE and RED alternately and you hear"pairing".

Step 3, Keep them close and wait until WHITE LED on transmitter flashes twice per 5s and you                             hear"connected".

Step 4, Double click MFB on transmitter, WHITE LED is on for 2s, now the transmitter and receiver is                 locked to each other.

Once locked to each other, they will auto reconnect to each other for each use, NO NEED to pair them. 

 

Have more questions? Submit a request

Comments

Powered by Zendesk